by in Uncategorized

Aging Mechanism Of Polyethylene Pipe Material In Chlorine Dioxide And Hypochlorite Solution

Márton Bredács, Andreas Frank, Amaia Bastero, Alex Stolarz, Gerald Pinter Papers # 2018 Las-Vegas Accelerated aging experiments by the immersion of a commercial polyethylene (PE) pipe grade in 10 ppm of chlorine dioxide (ClO2) and in 100 ppm of hypochlorite (HOCl) solution at 60 °C were performed. An additional immersion test was conducted in 1 […]

by in Uncategorized

Very High Molecular Weight Polyethylene Resins with Improved Chemical and Abrasion Resistance

Dr. Dane Chang, Dr. David Marshall, Chris Cox Papers # 2014 Chicago Plastic pipe applications often require polymers to have adequate abrasion resistance during usage. Although typical polyethylene resins have reasonably good resistance to abrasion and can be broadly used with a variety of chemicals, there are some demanding applications that require a resin with […]

by in Industry News

SHUANGLIN HDPE PIPE CONNECTION METHODS

The explanation about connection methods can be seen and read on link here https://www.shuanglinpipe.co.id/connection-method-hdpe-pipe/   The several methods of shuanglin hdpe pipe connection and fittings connection, attached the figure and the table here below. The application of  the methods based on outside diameter  (OD) Shuanglin HDPE pipe and fittings. 1. Pipe Connection The consist several methods […]

by in Industry News, Uncategorized

What is SDR pipe and how does it influence the pressure rating of the pipe?

SDR pipe :”Standard Dimensional Ratio” The SDR pipe is the “Standard Dimensional Ratio” and refers to the geometry of the pipe. SDR is defined as the ratio of the nominal outside diameter to the nominal wall thickness. SDR = dn/en Where dn is the nominal outside diameter of the pipe and en is the nominal (minimum) wall thickness of the pipe. Therefore a […]

by in Industry News, Uncategorized

Nominal Pressure

According to SNI 4829.2: 2015, Article 3.1.2.1 Nominal Pressure is a numerical design of pipe pressure that is related to the mechanical properties of the components of a piping system. Nominal pressure on the piping system on the HDPE SOLID WALL PIPE SHUANGLIN, namely: A. HDPE SOLID WALL PIPE SHUANGLIN PN 8 (SDR 11) Used […]

by in Uncategorized

Sustainable construction – Environmental impact analysis of integrating recycled HDPE into corrugated piping

D.W. Currence, B. Sauer Papers # 2018 Las-Vegas Society’s call for improved stewardship of natural resources and public funds continues to grow. Combined with the challenges facing public infrastructure has resulted in the broadened expectation for sustainable and resilient materials and products to serve in these future public infrastructure needs. Sustainability is most often synonymous […]

  • 1
  • 2
Switch The Language
    × Contact Us!

    PT SHUANGLIN PIPE INDONESIA is a joint venture subsidiary of Zhejiang Shuanglin Environment Co., Ltd. Our factory is located in CIKARANG, Indonesia. The plant covers an area of 4,000 square meters. Our company has introduced advanced production line and a professional production management team. The company mainly produces municipal and residential building water supply and drainage, sewage pipes and complete sets of systems. The product line includes HDPE/PP double-wall corrugated pipe and inspection wells for pipeline connection and other accessories.

    ADDRESS

    KAWASAN INDUSTRI DELTA SILICON 5 JL.KENARI BLOCK G.1 NO.28A-B LIPPO CIKARANG CIBATU CIKARANG SELATAN KAB BEKASI JAWA BARAT

    PHONE

    (021) 89915151

    EMAIL

    info@shuanglinpipe.co.id