Free enquiry
(021) 89915151
en English
zh-CN Chinese (Simplified)en Englishid Indonesianja Japanese
  1. Home
  2. Posts tagged: solid pipe
Oktober 11, 2021
by in Uncategorized

The Structural erformance of flexible pipe for landfill drainage

Authors:  D. F. Rogers, BSc, PhD, CEng, MICE, MIHT, Eur Ing, , The structural performance of perforated plastic pipelines used for landfill drainage is difficult to predict. This paper aims to describe their structural action on the basis of field measurements, and thereby make recommendations for their design and installation. The key requirements for structural support […]

Continue reading
September 20, 2021
by in Uncategorized

Earth Pressure Measurements On Buried HDPE Pipe

Authors:  M.L. TALESNICK*, H.-W. XIA†, and I.D. MOORE† An understanding of the stress distributions that act on buried pipes plays a key role in the development and use of design methods for these structures. The radial stresses that develop on buried flexible pipes have been investigated by a number of researchers through experimental, analytical and numerical methods. […]

Continue reading
September 13, 2021
by in Uncategorized

Compaction Effects On Strains Within Profiled Thermoplastic Pipes

Authors:  W. I. Brachman1, , I. D. Moore2, , and S. M. Munro3, Results from laboratory tests are reported to establish how pipe deflections, strains and local bending are influenced by the selection of backfill soil and its placement for two profiled thermoplastic culverts. Lined-corrugated high-density polyethylene (HDPE) and poly vinyl chloride (PVC) pipes with a nominal […]

Continue reading
September 6, 2021
by in Uncategorized

Performance Of Buried HDPE Pipes – Part II: Total Deflection Of The Pipe

Zhou1F. Wang2Y. J. Du3 M. D. Liu4 PhD Candidate Associate Professor Professor and Director Senior Lecturer Total deflection of buried thermoplastic pipes is extensively studied in previous work as it is a service limit state specified in design standards. In this paper, two-dimensional finite-element modeling is conducted to investigate the total deflection of buried high-density polyethylene (HDPE) pipes with a […]

Continue reading
September 1, 2021
by in Uncategorized

Performance Of Buried HDPE Pipes- Part 1 : Peaking Deflection During Initial Backfilling Process

Zhou1 Y. J. Du2 F. Wang3 M. D. Liu4 PhD Candidate Professor and Director Associate Professor Senior Lecturer Peaking deflection caused by compacting the sidefill, referred to as the maximum change of the pipe diameter divided by the undeformed diameter, is an important parameter in the design and safety check of buried pipelines. However, quantitative equations on the deflection useful for engineering […]

Continue reading
Agustus 18, 2021
by in Uncategorized

Durability of Polyethylene Geopipes for Landfill Applications After Several Years in Service

Durability of polyethylene geopipes for landfill applications after several years in service Helmut Zanzinger, Kurt Engelsing & Sebastian Hausmann SKZ – German Plastics Center, Würzburg, Germany Geosynthetics (GSY) and geopipes (GPI) used for landfill applications should have a guaranteed service life of at least 100 years according to the up-to-date landfill directive in Germany. Bearing […]

Continue reading
Agustus 11, 2021
by in Uncategorized

Case study – Clogging of a geotextile/geopipe system in a landfill drainage application.

Fleming, I.R. & Barone, F.S. & Dewaele, Paul. (2010). 9th International Conference on Geosynthetics – Geosynthetics: Advanced Solutions for a Challenging World, ICG 2010. 1127-1130. In 2004, a drainage system was installed near the toe of a municipal landfill serving the city of Barrie, Ontario. The drainage system consists of 300 mm diameter perforated HDPE […]

Continue reading
Agustus 4, 2021
by in Uncategorized

HDPE-Geopipes, Soil-Structure Interaction

Zanzinger LGA, Geotechnical Institute, Nuremberg, Germany Gartung LGA, Geotechnical Institute, Nuremberg, Germany Perforated geopipes are part of the leachate collection system at the base of solid waste landfills. Their structural performance depends on the embedment which is formed by a compacted clay layer, a geomembrane and a sand-bentonite cushion below and coarse gravel above the […]

Continue reading
Switch The Language
    × Contact Us!

    PT SHUANGLIN PIPE INDONESIA is a joint venture subsidiary of Zhejiang Shuanglin Environment Co., Ltd. Our factory is located in CIKARANG, Indonesia. The plant covers an area of 4,000 square meters. Our company has introduced advanced production line and a professional production management team. The company mainly produces municipal and residential building water supply and drainage, sewage pipes and complete sets of systems. The product line includes HDPE/PP double-wall corrugated pipe and inspection wells for pipeline connection and other accessories.

    ADDRESS

    KAWASAN INDUSTRI DELTA SILICON 5 JL.KENARI BLOCK G.1 NO.28A-B LIPPO CIKARANG CIBATU CIKARANG SELATAN KAB BEKASI JAWA BARAT

    ADDRESS

    PT SHUANGLIN PIPE INDONESIA
    (NEW PLANT KITIC)
    Jl. Anggrek VII, Kavling No.26 Kawasan Industri Terpadu Indonesia China (KITIC ) Deltamas, Desa Nagasari. Kec. Serang Baru. Kabupaten Bekasi. Jawa Barat 17330

    PHONE

    (021) 89915151

    EMAIL

    info@shuanglinpipe.co.id

    PURCHASE