by in Industry News, Uncategorized

Laboratory Device for Checking The Thermal Energy Delivered by The Electrofusion Fittings

Dominique GUEUGNAUT, Adil BOUJLAL, Aymeric LOPITAUX, Bertrand SEVRE Papers # 2018 Las-Vegas A special concept has been developed by GRTgaz Research and Innovation Center for Energy (RICE) for temperature mapping at the interface of an electrowelded assembly.The technical solution consists of a tubular piece in place of the real PE pipe, made of a non-weldable polymer […]

by in Uncategorized

Buried Flexible Pipes Behaviour In Unreinforced And Reinforced Soils Under Cyclic Loading

In this research, large-scale fully instrumented laboratory tests were conducted to investigate the behaviour of flexible high-density polyethylene (HDPE) pipes, in unreinforced and geogrid-reinforced sand, subjected to incrementally increasing cyclic loading; for example, due to different vehicle capacities or load increase with passing time. Results illustrated that the deformation rate in the pipe and footing, the strain generation […]

by in Industry News, Uncategorized

Large pressure pipe system – Fully PE100

Sverre Tragethon, Martin Andersson Papers # 2018 Las-Vegas Global mega trends push for investments in sewage treatment capacity & efficiency. A trend is to go for central regional treatment sites, typically remotely located from dense populated cities. This calls for high capacity pressure sewage transmission pipelines. Reliable operation is of course of paramount importance for […]

by in Uncategorized

Antioxidant Depletion In High-Density Polyethylene Pipes Exposed To Synthetic Leachate And Air

Authors:  R.P. Krushelnitzky1, and R.W.I. Brachman2 ABSTRACT: Antioxidant depletion rates are reported for samples of one particular high-density polyethylene pipe when immersed in air and a synthetic municipal solid waste leachate, obtained by measuring the oxidative induction time (OIT) at temperatures of 22°C, 40°C, 70°C and 85°C with time. Of the factors examined, the rate of antioxidant depletion […]

by in Uncategorized

Stress Concentrations Around Circular Holes in Perforated Drainage Pipes

Authors: R.W.I. Brachman, , and R.P. Krushelnitzky, Stress concentrations around circular holes in perforated buried pipes obtained from three-dimensional elastic finite element analysis are presented. The maximum stresses around the perforation were found to depend on the thickness and diameter of the pipe, the diameter of the perforation, the circumferential location of the perforation, and the axial and circumferential […]

by in Uncategorized

Earth Pressure Measurements On Buried HDPE Pipe

Authors:  M.L. TALESNICK*, H.-W. XIA†, and I.D. MOORE† An understanding of the stress distributions that act on buried pipes plays a key role in the development and use of design methods for these structures. The radial stresses that develop on buried flexible pipes have been investigated by a number of researchers through experimental, analytical and numerical methods. […]

by in Uncategorized

Compaction Effects On Strains Within Profiled Thermoplastic Pipes

Authors:  W. I. Brachman1, , I. D. Moore2, , and S. M. Munro3, Results from laboratory tests are reported to establish how pipe deflections, strains and local bending are influenced by the selection of backfill soil and its placement for two profiled thermoplastic culverts. Lined-corrugated high-density polyethylene (HDPE) and poly vinyl chloride (PVC) pipes with a nominal […]

by in Uncategorized

Durability of Polyethylene Geopipes for Landfill Applications After Several Years in Service

Durability of polyethylene geopipes for landfill applications after several years in service Helmut Zanzinger, Kurt Engelsing & Sebastian Hausmann SKZ – German Plastics Center, Würzburg, Germany Geosynthetics (GSY) and geopipes (GPI) used for landfill applications should have a guaranteed service life of at least 100 years according to the up-to-date landfill directive in Germany. Bearing […]

Switch The Language
    × Contact Us!

    PT SHUANGLIN PIPE INDONESIA is a joint venture subsidiary of Zhejiang Shuanglin Environment Co., Ltd. Our factory is located in CIKARANG, Indonesia. The plant covers an area of 4,000 square meters. Our company has introduced advanced production line and a professional production management team. The company mainly produces municipal and residential building water supply and drainage, sewage pipes and complete sets of systems. The product line includes HDPE/PP double-wall corrugated pipe and inspection wells for pipeline connection and other accessories.

    ADDRESS

    KAWASAN INDUSTRI DELTA SILICON 5 JL.KENARI BLOCK G.1 NO.28A-B LIPPO CIKARANG CIBATU CIKARANG SELATAN KAB BEKASI JAWA BARAT

    ADDRESS

    PT SHUANGLIN PIPE INDONESIA
    (NEW PLANT KITIC)
    Jl. Anggrek VII, Kavling No.26 Kawasan Industri Terpadu Indonesia China (KITIC ) Deltamas, Desa Nagasari. Kec. Serang Baru. Kabupaten Bekasi. Jawa Barat 17330

    PHONE

    (021) 89915151

    EMAIL

    info@shuanglinpipe.co.id