Free enquiry
(021) 89915151
en English
zh-CN Chinese (Simplified)en Englishid Indonesianja Japanese
  1. Home
  2. Posts tagged: jual pipa hdpe
Mei 11, 2023
by in Uncategorized

Abraison Resistance Improvement of a High Density Polyethylene by Cross-Linking for Manufacture of Mine Tailings Transportation Pipes

Patricia Perdiz Fernandez, Miguel Angel Molano Niampira, Felipe Salcedo Galán, Felipe Álvarez Torres Papers # 2014 Chicago Abrasion resistance is the ability of a material to withstand mechanical action such as rubbing, scraping, or erosion. Such ability helps to maintain the material’s original appearance, structure and mechanical properties. It’s a decisive factor in the selection […]

Continue reading
April 17, 2023
by in Uncategorized

Fatigue crack growth testing in chlorinated water at elevated temperatures – Test equipment and test procedure

Joerg Fischer, Patrick R. Bradler, Reinhold W. Lang Papers # 2018 Las-Vegas In the present paper, a novel test system for conducting fatigue crack growth (FCG) experiments under superimposed mechanical-environmental conditions is presented. FCG experiments were performed on a polypropylene (PP) grade and a short-glass fiber reinforced polyamide 66 (PA-GF) grade as model materials. The […]

Continue reading
April 4, 2023
by in Uncategorized

FLOWABLE FILL FOR PLASTIC PIPE

Amster Howard # 2021 Amsterdam Flowable fill is used for many applications, but mainly for pipe trench embedment and backfill. There are three ways that using flowable fill can be kind to the environment. Because flowable fill is self-leveling and has a strength greater than the native soil, the trench cross section can be minimized. […]

Continue reading
Maret 27, 2023
by in Uncategorized

SLOW CRACK GROWTH IN POLYETHYLENE PIPES: FRACTURE SURFACE EVIDENCE FOR THE SLOW CRACK GROWTH MECHANISM IN ACCELERATED TESTS

Mark Boerakker, Rudy Deblieck, a Harm Caelers, Arno Wilbers, Tine Boonen a DSM, Britta Gerets, Mirko Wenzel # 2021 Amsterdam Components made of plastic are facing ever-increasing demands with respect to their production, use and durability. This also holds for gas and drinking water pressure pipes made of high-density polyethylene (PE-HD), where service lifetimes of […]

Continue reading
Maret 6, 2023
by in Uncategorized

POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) IN LOW TEMPERATURE DISTRICT HEATING SYSTEMS

Alex Stolarz, Klaus Grønnegaard Lauridsen # 2021 Amsterdam Low temperature District Heating – COOL DH – addresses the challenges of the upcoming decades in the energy sector for new housing developments. Energy efficiency is an important aspect of modern building construction. Improved building insulation and other technologies result in lower heat demand and enable new […]

Continue reading
Februari 14, 2023
by in Uncategorized

TESTING SPOOLABLE REINFORCED FLEXIBLE PIPES AND LINER MATERIAL FOR HIGH-PRESSURE HYDROGEN TRANSPORT

Sjoerd Jansma, Peter Cloos, Ernst van der Stok # 2021 Amsterdam This paper describes two different test methods used to determine the permeation rate of hydrogen through a reinforced thermoplastic pipe (RTP) system with a HDPE liner pipe and a gas-tight layer at a pressure of 42 bar(g) hydrogen and ambient temperature. One method involThe results of the aforementioned […]

Continue reading
Januari 31, 2023
by in Uncategorized

RESTRAINED MECHANICAL JOINING DEVICES FOR HDPE PIPE: PERFORMANCE CHARACTERISTICS AND TEST PROTOCOL

Justin Brandt, Mike Griffin, Tony Cuvo # 2021 Amsterdam As plastic pipe gains share in new markets and applications, additional joining methods add further value, enabling continued growth for plastic pipes. To date, definitions of a “fit-for-purpose” mechanical joint for High Density Polyethylene (HDPE) pressure piping systems can vary significantly. As such, mechanical joints are typically undifferentiated […]

Continue reading
Desember 26, 2022
by in Tips, Uncategorized

Development Of Large Diameter Continuous Fiber Reinforced Thermoplastic Pipe

Fengliang Jiang, Nian Wu Papers # 2018 Las-Vegas This article discusses the development of the technique in producing large-diameter, medium-and-lowpressure water-delivery pipes. The continuous fiber-reinforced thermoplastic tapes perfectlyimpregnated with thermoplastic resin are wound layer by layer to form three-layer fibre reinforced polyethylene(PE) composite pipe (CGFR-PE) with inner and outer polyethylene layers as the protective functional […]

Continue reading
Desember 5, 2022
by in Uncategorized

EXPERIMENTAL DETERMINATION OF THE EFFECTS OF LIQUID HYDROCARBONS ON THE LONG-TERM CREEP RUPTURE PROPERTIES OF PRESSURE PIPE GRADE UNPLASTICIZED POLYAMIDE-12

James F. Mason, Akshay Ponda, Hermann van Laak, Buc Slay # 2021 Amsterdam The effects of liquid hydrocarbons on long term strength of pipe grade thermoplastic resins is an important consideration when designing pressure pipe for use in the oil and gas industry. There is an extensive body of work going back several decades descri […]

Continue reading
Switch The Language
    × Contact Us!

    PT SHUANGLIN PIPE INDONESIA is a joint venture subsidiary of Zhejiang Shuanglin Environment Co., Ltd. Our factory is located in CIKARANG, Indonesia. The plant covers an area of 4,000 square meters. Our company has introduced advanced production line and a professional production management team. The company mainly produces municipal and residential building water supply and drainage, sewage pipes and complete sets of systems. The product line includes HDPE/PP double-wall corrugated pipe and inspection wells for pipeline connection and other accessories.

    ADDRESS

    KAWASAN INDUSTRI DELTA SILICON 5 JL.KENARI BLOCK G.1 NO.28A-B LIPPO CIKARANG CIBATU CIKARANG SELATAN KAB BEKASI JAWA BARAT

    ADDRESS

    PT SHUANGLIN PIPE INDONESIA
    (NEW PLANT KITIC)
    Jl. Anggrek VII, Kavling No.26 Kawasan Industri Terpadu Indonesia China (KITIC ) Deltamas, Desa Nagasari. Kec. Serang Baru. Kabupaten Bekasi. Jawa Barat 17330

    PHONE

    (021) 89915151

    EMAIL

    info@shuanglinpipe.co.id

    PURCHASE