Free enquiry
(021) 89915151
en English
zh-CN Chinese (Simplified)en Englishid Indonesianja Japanese
  1. Home
  2. Posts tagged: PPR Fittings
Agustus 23, 2023
by in Industry News, Market Reports, Uncategorized

MODIFIED PLAIN STRAIN GROOVED TENSILE TEST TO EVALUATE LARGE DIAMETER PE PIPES

Plastic Pipes Conference Association # 2021 Amsterdam Thomas R. Kratochvilla, Patrick Grünbeck, Christoph Bruckner, Raimund Eremiasch, Harald Wilhelm, Mario Vukelja In the last decades pipe dimensions of extruded PE pipes have reached new orders of size. Today, PE pipes with outer diameters of up to DN/OD 3500 mm are produced and used for pressure pipe […]

Continue reading
Juli 3, 2023
by in Market Reports, Uncategorized

Comparison Between the Stepped Isothermal Method (SIM) and Conventional Creep and Creep Rupture Tests on Polypropylene Used In Corrugated Drainage Pipe

Papers Plastic Pipes Conference Association # 2014 Chicago Bill R. Vanhoose, Jarrett A. Nelson, Christa K. McNish, Richard W. Thomas The Stepped Isothermal Method (SIM) is a form of Time-Temperature Superpositioning (TTS) that involves measuring the creep rate of a sample while it is subjected to a series of isothermal temperature steps. The accelerated temperature […]

Continue reading
Mei 11, 2023
by in Uncategorized

Abraison Resistance Improvement of a High Density Polyethylene by Cross-Linking for Manufacture of Mine Tailings Transportation Pipes

Patricia Perdiz Fernandez, Miguel Angel Molano Niampira, Felipe Salcedo Galán, Felipe Álvarez Torres Papers # 2014 Chicago Abrasion resistance is the ability of a material to withstand mechanical action such as rubbing, scraping, or erosion. Such ability helps to maintain the material’s original appearance, structure and mechanical properties. It’s a decisive factor in the selection […]

Continue reading
April 17, 2023
by in Uncategorized

Fatigue crack growth testing in chlorinated water at elevated temperatures – Test equipment and test procedure

Joerg Fischer, Patrick R. Bradler, Reinhold W. Lang Papers # 2018 Las-Vegas In the present paper, a novel test system for conducting fatigue crack growth (FCG) experiments under superimposed mechanical-environmental conditions is presented. FCG experiments were performed on a polypropylene (PP) grade and a short-glass fiber reinforced polyamide 66 (PA-GF) grade as model materials. The […]

Continue reading
April 11, 2023
by in Uncategorized

Effect of beta-nucleation on aging and crack growth resistance of polypropylene exposed to chlorinated water

Joerg Fischer, Paul J. Freudenthaler, Patrick R. Bradler, Reinhold W. Lang, Susan C. Mantell Papers # 2018 Las-Vegas This research addresses the effect of nucleation on the global aging behavior and the fatigue crack growth (FCG) resistance of commercial alpha- and beta-nucleated polypropylene random copolymer pipe grades (PP-R) when exposed to chlorinated water (5 mg/l […]

Continue reading
Maret 27, 2023
by in Uncategorized

SLOW CRACK GROWTH IN POLYETHYLENE PIPES: FRACTURE SURFACE EVIDENCE FOR THE SLOW CRACK GROWTH MECHANISM IN ACCELERATED TESTS

Mark Boerakker, Rudy Deblieck, a Harm Caelers, Arno Wilbers, Tine Boonen a DSM, Britta Gerets, Mirko Wenzel # 2021 Amsterdam Components made of plastic are facing ever-increasing demands with respect to their production, use and durability. This also holds for gas and drinking water pressure pipes made of high-density polyethylene (PE-HD), where service lifetimes of […]

Continue reading
Maret 6, 2023
by in Uncategorized

POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) IN LOW TEMPERATURE DISTRICT HEATING SYSTEMS

Alex Stolarz, Klaus Grønnegaard Lauridsen # 2021 Amsterdam Low temperature District Heating – COOL DH – addresses the challenges of the upcoming decades in the energy sector for new housing developments. Energy efficiency is an important aspect of modern building construction. Improved building insulation and other technologies result in lower heat demand and enable new […]

Continue reading
Februari 14, 2023
by in Uncategorized

TESTING SPOOLABLE REINFORCED FLEXIBLE PIPES AND LINER MATERIAL FOR HIGH-PRESSURE HYDROGEN TRANSPORT

Sjoerd Jansma, Peter Cloos, Ernst van der Stok # 2021 Amsterdam This paper describes two different test methods used to determine the permeation rate of hydrogen through a reinforced thermoplastic pipe (RTP) system with a HDPE liner pipe and a gas-tight layer at a pressure of 42 bar(g) hydrogen and ambient temperature. One method involThe results of the aforementioned […]

Continue reading
Switch The Language
    × Contact Us!

    PT SHUANGLIN PIPE INDONESIA is a joint venture subsidiary of Zhejiang Shuanglin Environment Co., Ltd. Our factory is located in CIKARANG, Indonesia. The plant covers an area of 4,000 square meters. Our company has introduced advanced production line and a professional production management team. The company mainly produces municipal and residential building water supply and drainage, sewage pipes and complete sets of systems. The product line includes HDPE/PP double-wall corrugated pipe and inspection wells for pipeline connection and other accessories.

    ADDRESS

    KAWASAN INDUSTRI DELTA SILICON 5 JL.KENARI BLOCK G.1 NO.28A-B LIPPO CIKARANG CIBATU CIKARANG SELATAN KAB BEKASI JAWA BARAT

    ADDRESS

    PT SHUANGLIN PIPE INDONESIA
    (NEW PLANT KITIC)
    Jl. Anggrek VII, Kavling No.26 Kawasan Industri Terpadu Indonesia China (KITIC ) Deltamas, Desa Nagasari. Kec. Serang Baru. Kabupaten Bekasi. Jawa Barat 17330

    PHONE

    (021) 89915151

    EMAIL

    info@shuanglinpipe.co.id

    PURCHASE