by in Uncategorized

Case study – Clogging of a geotextile/geopipe system in a landfill drainage application.

Fleming, I.R. & Barone, F.S. & Dewaele, Paul. (2010). 9th International Conference on Geosynthetics – Geosynthetics: Advanced Solutions for a Challenging World, ICG 2010. 1127-1130. In 2004, a drainage system was installed near the toe of a municipal landfill serving the city of Barrie, Ontario. The drainage system consists of 300 mm diameter perforated HDPE […]

by in Uncategorized

HDPE-Geopipes, Soil-Structure Interaction

Zanzinger LGA, Geotechnical Institute, Nuremberg, Germany Gartung LGA, Geotechnical Institute, Nuremberg, Germany Perforated geopipes are part of the leachate collection system at the base of solid waste landfills. Their structural performance depends on the embedment which is formed by a compacted clay layer, a geomembrane and a sand-bentonite cushion below and coarse gravel above the […]

by in Industry News, Tips

Perbandingan pipa pembuangan bawah tanah HDPE dengan pipa konkrit

1.Diameter pipa antara DN600-DN1600, rasio harga satuan komprehensif dengan diameter yang sama antara pipa HDPE dengan pipa konkrit/semen adalah 1:1.3. 2.Kapasitas aliran HDPE 1.3 kali dari pipa konkrit/semen. Misalnya jika menggunakan pipa konkrit/semen diameter DN800, maka pipa HDPE hanya perlu menggunakan diameter DN700(800/1.3). 3.Penyambungan HDPE yang sederhana dan cepat, meningkatkan kemajuan konstruksi. Dalam kondisi normal, […]

by in Uncategorized

The Impact of Heavy Hydrocarbon Permeation on PE Pipe

Karen Crippen, Ernest Lever Papers # 2014 Chicago DOT/PHMSA held a Government/Industry Pipeline R&D Forum on July 18-19, 2012. Five working groups met to discuss key pipeline technical challenges facing industry and government. The Design/Materials/Welding-Joining & Valves working group identified the effects of hydrocarbon permeation on plastic pipe strength and fusion performance as a gap […]

by in Uncategorized

Less is more: polypropylene materials for sewerage & drainage pipes with reduced energy and carbon footprints

Papers # 2016 Berlin The environmental impact in terms of global warming potentials (GWP) and nonrenewable energy demand (NRED) of sewerage & drainage pipes based on PP-MD, PP-HM, PP-B, and concrete has been assessed using life cycle analysis methodology. It can be concluded that PP-MD and PP-HM materials are able to significantly lower both GWP […]

by in Uncategorized

Long-Term Behavior Of Glass Fiber Reinforced Polyethylene

Mitsuaki Tokiyoshi, Philippe Vanspeybroeck, Kensei Inoue, Stephan Fullgrabe, Takashi Kuriyama, Toshinori Kawabata, Joji Hinobayashi Papers # 2016 Berlin Big diameter polyethylene pipes used an important role due to superior performance (Flexibility, light weight, long lifetime and tighten joint) for water and industrial supply to several countries. However according to standard concerned Polyethylene pipes as like […]

by in Uncategorized

Expanding The Application Range Of High Density Polyethylene For Use As An Inner-Liner Material In Reinforced Thermoplastic Pipe And Steel Pipe

Johannes de Bruin, Dr. Bert Dalmolen, Albo van Hateren Papers # 2016 Berlin Normal High Density Polyethylene (HDPE) is commonly used as the fluid contacting element, or the “inner-liner”, in Reinforced Thermoplastic Pipes (RTP) and steel pipes up to 65 ºC. Through a modification of the HDPE polymer matrix, by adding nanoparticles, the E-modulus can be increased. […]

by in Industry News, Uncategorized

Chemical and Temperature Resistance of Polyethylene Pipes for Industrial Applications

Dr. Amaia Bastero, David López Piquer Papers # 2014 Chicago The industrial sector has traditionally used metal pipes for transporting a wide variety of chemicals and highly corrosive liquids. When metal pipes are exposed to aggressive media, their lifetime is considerably reduced. Polyethylene pipes, have demonstrated since the 1950s to be a safe, reliable and […]

by in Uncategorized

New Process For The Hot Forming Of The Integrated Socket On Underground Drainage Pipes Made Of High Modulus Polypropylene With A Compact Or Multilayer Wall Structure

Giorgio Tabanelli Papers # 2018 Las-Vegas In underground plastic drainage pipes the integrated socket joint technology is now used widely in PVC pipes with a compact or multilayer wall. On the other hand, in PP and HDPE pipes this form of connection, despite its well-known advantages, is still not widely used. The reason for this is basically […]

Switch The Language
    × Contact Us!

    PT SHUANGLIN PIPE INDONESIA is a joint venture subsidiary of Zhejiang Shuanglin Environment Co., Ltd. Our factory is located in CIKARANG, Indonesia. The plant covers an area of 4,000 square meters. Our company has introduced advanced production line and a professional production management team. The company mainly produces municipal and residential building water supply and drainage, sewage pipes and complete sets of systems. The product line includes HDPE/PP double-wall corrugated pipe and inspection wells for pipeline connection and other accessories.

    ADDRESS

    KAWASAN INDUSTRI DELTA SILICON 5 JL.KENARI BLOCK G.1 NO.28A-B LIPPO CIKARANG CIBATU CIKARANG SELATAN KAB BEKASI JAWA BARAT

    ADDRESS

    PT SHUANGLIN PIPE INDONESIA
    (NEW PLANT KITIC)
    Jl. Anggrek VII, Kavling No.26 Kawasan Industri Terpadu Indonesia China (KITIC ) Deltamas, Desa Nagasari. Kec. Serang Baru. Kabupaten Bekasi. Jawa Barat 17330

    PHONE

    (021) 89915151

    EMAIL

    info@shuanglinpipe.co.id